Should you need a laptop cooling pad for gaming?

0
A laptop cooling pad, often referred to as a laptop cooler or chill mat is used by people to abase the effect of heating in the laptop. There are various types of laptop cooling pads available in the market as per the needs of the users. The primary purpose of this laptop accessory is to minimize the temperature of the laptop and thereby protecting it from overheating. The users are also benefitted from it as they get rid of the discomforts that overheating leads to.

The Top Things You Would Love a Cooling Pad For

Firstly, let’s moot about various laptop cooling pads available in the market. 1. Active coolers: This type of laptop coolers uses convention to release the heat from the internal architecture of the laptop. Conventionally, there are about one to six cooler fans that facilitate the movement of heat. The cooler fans work by taking power from the power adaptor or the USB ports or the inbuilt USB. It completely depends on the type of active cooler. Also, the speed of the fans can be adjusted by you manually or automatically. One of the drawbacks of active coolers is that the inbuilt USB power supply produces power for the working of USB fans which results in the generation of a small amount of heat. Although this generated heat is very minute when compared to the heat removed by the fans from the laptop. 2. Passive coolers: This type of laptop coolers uses conduction to remove the heat from the internal architecture of the laptop. These don’t consume any extra power, in fact, the pads are made up of a special material that absorbs the heat produced by the laptop. The organic salt compounds embedded inside the pads allow them to absorb the heat. If your laptop has air ventilators at the bottom, you should not go for the passive laptop coolers. The reason behind them is easy. The cooling pad chokes the ventilators and this leads to overheating. So, depending upon the position of the ventilators in the laptop, one must determine the type of cooling pad used. Passive coolers are nominal in cost and reasonably provide six to eight hours of continuous cooling. 3. Multi-surface cooler: The biggest disadvantage of passive coolers is that they can’t be used in laptops that have ventilators at the bottom. To overcome this drawback, multi-surface coolers came into existence. There is a multiple surface cooling i.e. the air flow is circulated between the base of the laptop and cooler as well as between the base of the cooler and the surface on which laptop is kept. The surface can be your lap, table, sofa, cushion or anything. 4. Multipurpose coolers: Multipurpose coolers were designed to facilitate multiple tasks. They are embedded in writing pad and card reader blocks. These are majorly designed for students and office use but due to bulkiness, they have limited portability. The heavyweight results in numb legs.

Should You Get a Cooling Pad?

Talking about whether you should actually use the laptop cooling pads or not, it’s completely your discretion. Though, I can guide you through that when you should and when not use the laptop cooling pads. 1. It’s Only Temporary First and foremost, know that laptop cooling pads are a temporary solution to the permanent overheating issue. So, if you’re having an old laptop which often gets heated up while playing games, you can go for a cooling pad to prolong the use of the laptop. But few months or a year later, you’ll have to find a permanent solution to it. The permanent solution can be to get it repaired or clean it or both or purchase a new one. 2. There Might Be Underlying Causes The major cause of the heating up of laptops is due to a thick coating of dust on cooling fans. The dust opposes the fans to cool down the CPU. Secondly, the laptops are meant to be slim and stylish and hence, the techies can’t incorporate big cooling fans in the laptops like in the home desktops. Basically, a laptop cooler has an embossed platform to place the laptop. This facilitates a uniform circulation of the heat from internal architecture and external environment. Apart from this, many laptop coolers come with inbuilt fans, temperature sensors, LED lights, etc.. to make them look good. They are powered by the USB cable. Well, I’m actually talking about active coolers. 3. You Don’t Get a Significant Improvement Now, let me state it fair and simple that you can’t expect a tremendous improvement in the performance of the laptop by simply placing a cooler or fans at the bottom of the laptop. I don’t deny the fact that the degree of performance increases but not too much extent. When concerned with gaming, you might think that keeping track of the temperature will boost up the performance of the laptop, the reality is gloomy. Your gaming experience will not boom up by simply putting fans on the bottom.

So, what makes it a good investment?

The advantage of using laptop cooling pads apart from cooling the laptop is that it is comfortable to keep the laptop on lap. Most of the laptops are designed to be used on a flat surface like a table but the use of cooling pads ensures greater comfortability when used on laps. Next, if your laptop is prone to overheating, it may have adverse effects on your health. Your laptop isn’t also going to last long if it heats up continually. Studies state that it may even lead to cancer. If you aren’t intent on buying a new laptop with better specifications that ensure that it does not take up too much processing power to heat itself up, you would do better using Cooling pads. They aren’t pricey and you could just save yourself a lot of time and money.

Can You Overcharge a Laptop?

0
Overcharge a Laptop
In short, the answer is a big NO.
However, while it’s not possible to overcharge a laptop but improper usage can definitely shorten the battery lifespan. Additionally, overcharging could result in overheating of the internal circuitry, which you wouldn’t want. To know how long your battery can retain a good charge, or whether you can overcharge it, you need to look at the type of battery your laptop is using. Most laptops and other portable equipment use the lithium-ion battery. They cannot be overcharged. However, other types of batteries, like nickel-cadmium ones, can. Let us take a look at what is the difference between the two.

When Did Nickel Cadmium Batteries Become Popular?

Until the 1990s, most portable devices used nickel-cadmium battery. What worked for these batteries were a number of things:
  • Easy shipping and these don’t require special preparations for the same.
  • Low cost
  • Good load performance
  • The batteries survived well even in cold conditions.
The biggest problem with nickel-cadmium battery was that they have a self-discharging nature. With rising concern about the environment, and toxicity inherent in Ni-cd batteries, it became a task to find a way to dispose of them easily. Dump grounds for their disposal are not easily found and as a result, many countries have either banned or taken measures to slow down production and supply of Ni-cd batteries. Overcharge a Laptop

Ni-cd Batteries Can Be Overcharged

It’s worth noting that Ni-cd and nickel metal hydride (Ni-MH) batteries can be overcharged if they go through too many cycles of charging and discharging. But, the contagious charging and discharging leads to the reduction in the battery’s effectiveness and capacity.

Does Your Laptop Contain a Lithium-Ion Battery

In the 1970s, first non-rechargeable lithium metal battery hit the market. Lithium is the lightest metal known for its prolific electrochemical potential. In order to make rechargeable batteries, non-metallic lithium batteries were released in the market which were again a big hit. And today, we use lithium-ion batteries for the majority of the purposes and applications. With lithium-ion batteries, you don’t have to worry about causing harm to the environment. Lithium-Ion Battery

What Happens When You Charge Your Laptop For Longer Hours?

When you leave your laptop plugged in even after the full charge, the internal circuitry of the lithium-ion battery ceases the charging process. These batteries never get affected by overcharging. Remember, lithium batteries can’t be overcharged but they don’t get bruised on overcharging. The basic reason of high stamina of lithium-ion battery is the presence of an internal circuity. In the absence of this, the battery may get over-heated and may possibly burn when overcharged. The internal circuitry prevents the battery from heating and if your battery gets warm while charging, simply remove it. Your battery may be defective! The only situation when a lithium-ion battery overcharge is when the internal circuitry glitches and the battery start to heat up while charging.

The Other Advantages

It’s not just the capacity to hold on to power that works to its advantage.
  • Lithium-ion batteries possess twice the energy density to that of Ni-cd battery.
  • The load characteristics weigh reasonably same as the Ni-cd battery.
  • Also, a single cell of the lithium-ion battery of high voltage can be used for all purposes rather than embedding three cells of 1.2 volts of Ni-cd battery in series.
  • Although lithium-ion battery also has the self-discharging capability, it’s nominal or negligible when compared to the Ni-cd battery.
  • No scheduled cycles of contagious charging and discharging is to be performed for boosting up the battery life.
Charge Your Laptop For Longer Hours Next question that arises here is, how can you boost up your laptop’s battery life? With a few simple and achievable precautions, you can still boost up the battery life. If your laptop uses a lithium-ion battery, never let the battery drain below 20% and keep its charging percentage between twenty and eighty. These batteries are subject to aging. If you’re not going to use your laptop for a long period of time, simply keep the battery fifty percent charged, neither more nor less. This will reduce the aging effect. If you leave the battery discharged for a long time, it may lose its charging capacity. On the other hand, Ni-cd and Ni-MH batteries require complete discharging and complete recharging to improve their overall performance and life.

Other precautions that can be taken are:

  • When you purchase a new laptop, charge it for at least twenty-four hours before use.
  • If your laptop is plugged into the wall, remove its battery.
  • If you’re not going to use your laptop for a long time, remove the battery. You could remove it after charging it to fifty percent to get the best results.
  • If the storage of the battery is done for a prolonged time, try to occasionally charge the battery even if it’s not in use.
  • Store the laptop under normal temperature conditions. Avoid exposing it to extreme hot and cold weathers.
  • Use system settings in order to generate reminders whenever your laptop battery drains below twenty percent.
  • Try preaching airplane mode when you’re not subjected to the use of the internet, Bluetooth, FM radio and NFC sharing.
  • It’s a good idea not to overcharge your laptop. However, it’ll not harm your laptop’s battery if your device runs on a lithium-ion battery.
If the internal circuitry of the battery malfunctions, the laptop may get overcharged and lead to overheating. This is an undesirable action, and one must remove the battery at that moment itself. Another aspect is that lithium battery’s capacity demolishes in cold weather. It must be heated up in order to charge and serve the desired work. So, keep your device safe and don’t try to overcharge thinking that you’ll be able to use it more. Overcharging will unknowingly lead to a decline in the battery life if it’s practiced on a daily basis.

What makes the Best Over the Head Bluetooth Headset?

0
Gone are the days when you had to skip out of the lane to attend the call while driving or had to trouble with the wire knots of the wired earphones. The times when you had to miss the calls because you’re busy exercising or working in the kitchen or unable to listen due to ambient noise. In this era of wireless technology, why should these issues remain unaddressed? The techies have come up with yet another invention called over the head Bluetooth headset to quench the above problems. It comprises a headphone and a microphone. This is connected to any Bluetooth device like your smartphone, and tablet to communicate and listen. Today, headphones have some great call control buttons helping you to pick up the call, terminate the call, reject a call, and switch the music track. Tinker around with the music or just talk to fellow riders thanks to a great range.

The Top Things to Look For In a Over the Head Bluetooth Headset?

bt-500 So, what makes your Bluetooth headset stand out? While purchasing a Bluetooth headset for yourself, always focus on the following aspects. • Professional v/s compact: The Bluetooth headsets come in two flavors, professional headsets, and compact headsets. The professional headsets have a high-quality microphone and extend many functionalities. These are basically used at call-centers. These have a long shaft that extends to your cheek and the sound quality is also superb. On the contrary, compact Bluetooth headsets have poor quality over the professional Bluetooth headsets. • Voice commands: Voice commandsWhile on a drive, it’s sometimes irritating to find the buttons and pick up the call or respond to it. And there are times when you fail to find the button and by the time you find it, the call is over. To overcome this issue, voice commands were incorporated in the Bluetooth headsets. With the improvement in technology and their lower cost, the incorporation of the same became easier and affordable. Users can simply answer the calls, reject the calls, and to check the battery status. This not only helps in driving but also yields multi-tasking. You can cook, exercise, work or engage yourself in anything while speaking to other person or listen to the music. • NFC technology: NFC stands for Near-field communication which is used to pair Bluetooth headset with other Bluetooth devices within the range. Here, you don’t have to check and update the settings again and again. This technology is quite similar to RFID (radio-frequency identification) and the only differentiating point is that it works within a determined Bluetooth range, unlike RFID. NFC sharing is optimal when you want all your devices to communicate with each other by mere Bluetooth interaction. With encryption, you can protect communication between devices easily. • Battery: The best over the head Bluetooth headsets must possess long battery life. This also depends on the amount of usage and your requirements. On an average, six hours of battery life is more than enough. • Comfortability: One of the most important aspect while determining the best over the head Bluetooth headset is the level of comfort you feel while using it. The speakers that rest on your ears must be heavily cushioned and rest on the outer edge of the earlobe. It would be best if one considers ergonomic Bluetooth headset. • Sound quality: The sound quality must be determined from both the directions. The quality that speakers provide from the other end and your pitch or sound quality delivered to the person via microphone. The sound must be crisp and crystal clear. • Noise cancellation capability: The over the head Bluetooth headphone must be able to cancel the effect of noises that surround you. The undesired and interrupting noise of speeding cars, traffic, wind, and chaotic market,Lol should be nullified. The best Bluetooth headphone must have the ability to detect the ambient noise and nullify its effect. • Stereo v/s HD sound: Stereo vs HD soundStereo headphones are used by most of the users to enjoy music as well as attend phone calls. But the music lovers can’t compensate with the quality of music and may demand for HD sound. The best over the head Bluetooth headphone must have HD sound quality over simple stereo headphones.   • A2DP technology: Those users who usually use smartphones in order to listen to the songs, the advanced audio distribution profile is best suited for them. This feature has a dual-channel audio streaming capability. Hence, you can access several smartphone features apart from listening to the songs. • AVRCP technology: If you wish to control all the features of all your devices using a single Bluetooth headset, audio/video remote control profile is a must. This enables you to play, pause, stop and adjust the volume of the songs or videos right from your headset. • Multipoint pairing: If you possess several devices and wish to listen to songs from different devices one by one, you’ll have to disconnect and reconnect your Bluetooth headset again and again which can be quite tedious. In order to overcome this, yet another feature available is a multipoint pairing. Here, you can pair your Bluetooth headset with all the reliable and available Bluetooth devices which include smartphones, tablets, and laptops. • Range: The maximum range of Bluetooth headsets is thirty-three feet, and then the connection drops completely. Although, the distortions tend to interfere the sound quality after surpassing a range of ten feet. One must go for a Bluetooth headset that provides maximum range. Typically, twenty feet range headsets are cool enough. Choose the best over the head Bluetooth headset today and make your rides better, safer and more fun!